Diagnostic Test
WARNING: This page is about a different car, the 2015 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
CHECK FOR AN ACTIVE DTC
NOTE:
Verify that the ICS buttons are clean and free of debris.
- With the scan tool, read DTCs and record on the repair order.
- With the scan tool, erase DTCs.
- Wait 120 seconds.
- With the scan tool, read ICS DTCs.
Is the DTC active?
Yes
- Replace the Integrated Center Stack (ICS) In accordance with the service information.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- The condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals and correct pin tension. If no problems are found, test complete.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .