Module, Forward Facing Camera: Installation: Installation
WARNING: This page is about a different car, the 2015 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Ensure that the windshield is clean of dirt, dust, or finger prints prior to installing the Forward Facing Camera (FFC) module.
- Install the FFC to the bracket on the windshield. Position the FFC to the bracket attachment point making sure that the alignment tabs are proper and set the FFC in place until the bracket locks engage.
- Connect the electrical connector to the back of the FFC.
- Assemble the rear view mirror covers into place. Refer to MIRROR, REARVIEW, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
- Perform the FFC calibration procedure. Refer to MODULE, FORWARD FACING CAMERA, MODULE PROGRAMMING .