Module, Adaptive Cruise Control: Removal: Bracket
WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the adaptive speed control (also known as the Adaptive Cruise Control/ACC) sensor (2) from the mounting bracket (3). Refer to MODULE, ADAPTIVE CRUISE CONTROL, REMOVAL .
- Remove the two screws (4) that secure the bracket to the underside of the front bumper support bar (1).
- Remove the mounting bracket from the bumper support bar.NOTE:
The three molded plastic ball socket clips in the ACC sensor mounting bracket MUST be removed, discarded and replaced with new ball socket clips any time the sensor is removed from the bracket.
- Remove the three molded plastic ball socket clips (5) from the back side of the ACC sensor mounting bracket and discard. The clips are removed by rotating them counterclockwise.