LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2016 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Electronic Control Modules (Service Information)) >> Standard Procedure >> Standard Procedure - Module Programming >> Programming The Kin
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming The Kin

WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Read all notes and cautions for programming procedures.

  1. Connect a battery charger to the vehicle.
  2. Connect the scan tool.
    NOTE:

    Have a unique vehicle PIN readily available before running the routine

    NOTE:

    If the PCM and KIN are replaced at the same time, the PCM MUST be programmed before the KIN. 

  3. Select "ECU View."
  4. Select "KIN".
  5. Select "Miscellaneous Functions."
  6. Select "KIN Replaced".
  7. Enter the PIN when prompted.
  8. Cycle ignition key after the successful routine completion.
NOTE:

If the PCM and the KIN are replaced at the same time, all vehicle keys will need to be replaced and programmed to the new KIN.

scientia non olet · About LEMON Manuals