LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2016 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Electronic Control Modules (Service Information)) >> Module, Door >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Door: Removal: Removal

WARNING: This page is about a different car, the 2015 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Door Control Module, Two Screws & Front Door Hardware Module Carrier
GC0145735Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the lower trim panel from the inside of the front door. Refer to PANEL, DOOR TRIM, REMOVAL .
  3. Disconnect each of the electrical connectors from the connector receptacles of the door control module (2).
  4. Remove the two screws (3) that secure the door control module to the front door hardware module carrier (1).
  5. Remove the door control module from the door hardware module carrier.