Module, Body Control: Removal: Removal
WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative the negative battery cable
- Remove the passenger side lower dash closeout panel.
- Remove the passenger side lower kick panel. Refer to PANEL, COWL TRIM, SIDE, REMOVAL .
- Disconnect all of the Body Control Module (BCM) connectors.
- Remove the two lower fasteners (2) securing the BCM to the bracket.
- Slide the BCM down until the BCM is released from the two interference tabs located at the top of the BCM.
- Remove the BCM (1) from the vehicle.