LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2016 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Electronic Control Modules (Service Information)) >> Module, Power Liftgate Control >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Power Liftgate Control: Removal: Removal

WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Two Body Wire Harness, Lower Left Inner D-pillar & Power LiftGate Module (PLGM)
GC0145737Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Move the quarter trim panel from the lower left inner D-pillar (1) far enough to access the Power LiftGate Module (PLGM) (2). Refer to PANEL, QUARTER TRIM, REMOVAL .
  3. Disconnect the two body wire harness (3) connectors from the PLGM connector receptacles.
  4. Depress the latch feature integral to the upper end of the PLGM housing and pull the top of the PLGM away from the lower left inner D-pillar.
  5. Disengage the two tabs integral to the lower end of the PLGM housing from the slots in the lower left inner D-pillar.
  6. Remove the PLGM from the vehicle.
scientia non olet · About LEMON Manuals