LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2016 >> ProMaster City Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Electronic Control Modules - (Service Information)) >> Module, Powertrain Control >> Removal >> Diesel
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Powertrain Control: Removal: Diesel

WARNING: This page is about a different car, the 2015 RAM ProMaster 3500, 2015 RAM ProMaster 2500, and 2015 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Power Distribution Center Cover & Nuts
GC0161798Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove nuts (1) and the Power Distribution Center (PDC) cover (2).
    Fig 2: Transmission Wire Harness Connector
    GC0162185Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the transmission wire harness connector (1).
  4. Disconnect wire harness connector (2) and detach wire harness from bracket.
    Fig 3: PCM Wire Harness Connector Cover & Nuts
    GC0162124Courtesy of CHRYSLER GROUP, LLC
  5. Remove nuts (2) and the PCM wire harness connector cover (1).
    Fig 4: PCM Wire Harness Connectors
    GC0161970Courtesy of CHRYSLER GROUP, LLC
  6. Unlock and disconnect the Powertrain Control Module (PCM) wire harness connectors (1, 2).
    Fig 5: Wire Harness Connector & Nut
    GC0161910Courtesy of CHRYSLER GROUP, LLC
  7. Disconnect wire harness connector (1).
  8. Remove nut (2) and the PCM with bracket from vehicle.
    Fig 6: PCM & Nuts
    GC0162156Courtesy of CHRYSLER GROUP, LLC
  9. Remove nuts (2) and the PCM (1) from the bracket.
scientia non olet · About LEMON Manuals