LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2016 >> ProMaster City Tradesman >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Electronic Control Modules - (Service Information)) >> Module, Glow Plug >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Glow Plug: Removal: Removal

WARNING: This page is about a different car, the 2015 RAM ProMaster 3500, 2015 RAM ProMaster 2500, and 2015 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Power Distribution Center Cover & Nuts
GC0161798Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove nuts (1) the Power Distribution Center (PDC) cover (2).
    Fig 2: Glow Plug Module Harness, Connector & Retainer
    GC0161896Courtesy of CHRYSLER GROUP, LLC
  3. Disengage wire harness retainer (3) and remove the wire harness (2).
  4. Disconnect the glow plug module wire harness connector (1).
    Fig 3: Glow Plug Module & Bolt
    GC0162004Courtesy of CHRYSLER GROUP, LLC
  5. Remove bolt (1) and the glow plug module (2).
scientia non olet · About LEMON Manuals