LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2017 >> Challenger SXT Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Memory >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Memory: Installation

GC0144638Courtesy of CHRYSLER GROUP, LLC
  1. Position the Memory Seat Module (MSM) (2) to the bracket (4) and connect all electrical connectors to the rear of the MSM.
    CAUTION:

    Properly align the Memory Seat Module (MSM) retaining tabs to the bracket, prior to engagement. Failure to follow these instructions may result damage to the MSM retaining tabs.

  2. Install the MSM into the bracket and engage the two rear MSM retaining tabs to the bracket.
  3. Engage the two front MSM retaining tabs (3 and 5) to the bracket by carefully pulling down on the front of the MSM.
  4. Connect all the electrical connectors (1) to the front of the MSM.
  5. Install the driver seat. Refer to SEAT, FRONT, INSTALLATION .
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals