LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2017 >> Challenger SXT Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (5.7L - Intermittent Condition, Pcm/ECM Reprogramming - Gas, Powertrain Verification Test & Pre-Diagnostic Troubleshooting Procedure - 1500) >> Standard Procedure >> Pcm/ECM Reprogramming - Gas >> Pcm/TCM Flash Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pcm/TCM Flash Reprogramming

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

This procedure is required when one or more of the following situations are true:

  1. A Powertrain Control Module (PCM) has been replaced.
  2. Diagnostic Trouble Code (DTC) P1602 - PCM Not Programmed is set.
  3. An updated calibration or software release is available for either the PCM or TCM.

This procedure assumes that the wiTECH™ VCI Pod and StarMOBILE® devices are properly configured to the dealership network with either a wired or wireless connection. The wiTECH™ VCI Pod and StarMOBILE® must also be running the latest operating system and software release. For help on how to network the StarMOBILE®, reference the appropriate Quick Start Networking Guide available on 'DealerCONNECT > Service > StarSCAN® and StarMOBILE® Tools > Online Documentation' or at www.dcctools.com, under the Download Center. For help on how to network the wiTECH™ VCI Pod, use the "Help" tab at the top of the wiTECH™ Diagnostic Application.

scientia non olet · About LEMON Manuals