Left Hand Drive: Installation

WARNING: This page is about a different car, the 2016 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Back Of Body Control Module Connectors

Courtesy of CHRYSLER GROUP, LLC

Connect the wire harness connectors to the back of the Body Control Module (BCM).
Position and secure the BCM to the BCM mounting bracket.

Fig 2: Body Control Module Connectors
Courtesy of CHRYSLER GROUP, LLC
Connect the electrical connectors to the front of the BCM.

Fig 3: Body Control Module Brackets, Connector, Nut & Screws
Courtesy of CHRYSLER GROUP, LLC
Position and secure the BCM brackets.
Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
Connect the negative battery cable.