LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2017 >> Challenger SXT Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 1311 (Electronic Control Modules (Service Information)) >> Module, Body Control >> Removal And Installation >> Right Hand Drive >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Right Hand Drive: Installation

WARNING: This page is about a different car, the 2016 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connections on the rear side of the assembly.
  2. Place the Body Control Module (BCM) assembly in its housing and secure the retainers to the bracket.
  3. Connect the electrical connections on the front side of the assembly.
  4. Fit the glovebox in its housing, engaging the retainers.
  5. Tighten the glove box compartments internal and lower screws.
  6. Tighten the side screw and reposition the trim in its housing, engaging the retainers.
  7. Connect the negative battery terminal.
  8. Perform BCM programming. Refer to MODULE, BODY CONTROL, MODULE PROGRAMMING .
scientia non olet · About LEMON Manuals