LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2017 >> Challenger SXT Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 1311 (Electronic Control Modules (Service Information)) >> Module, Powertrain Control >> Removal And Installation >> 2.4L >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: 2.4L: Installation

WARNING: This page is about a different car, the 2016 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position and install the PCM to the vehicle.
  2. Connect the ground wire and wire retaining nut to the PCM.
  3. Connect the wiring harness connectors to the PCM.
  4. Install the engine beauty cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable.
  6. Connect the diagnostic scan tool to the vehicle and select "ECM" in "miscellaneous features". Perform the "replacement unit" routine.
  7. With key in the "OFF" position and with the emergency lights turned on, go to "control BCM" in "miscellaneous features" and launch the "transfer secret key" procedure.
scientia non olet · About LEMON Manuals