Module, Body Control (BCM): Installation
WARNING: This page is about a different car, the 2017 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
- Slide the BCM into position so that the top two mounting tabs (1) on the BCM are properly aligned to the mounting weld studs and the lower mounting tabs slide into their respective mounting weld studs.
- Install the lower fastener (3), and tighten the securely.
- Tighten the upper fasteners securely.
- Connect the electrical connectors to the BCM receptacles.
- Install the glove box assembly (1). Refer to GLOVE BOX, INSTRUMENT PANEL, INSTALLATION .
- Connect the negative battery cable.
NOTE:
Program the BCM in accordance with the module replacement and programming guide. Refer to STANDARD PROCEDURE .