Module, Forward Facing Camera (FFCM): Installation
WARNING: This page is about a different car, the 2017 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Ensure that both inside and outside of the windshield in the area of the Forward Facing Camera (FFC) is clean of dirt, dust, or finger prints prior to installation.
- Install the FFC to the bracket on the windshield. Position the FFC to the bracket attachment point (1) making sure that the alignment tabs are proper (3) and set the FFC in place until the bracket locks (2) engage.
- Connect the electrical connector (1) to the back of the FFC (2).
- Assemble the rear view mirror covers into place. Refer to MIRROR, REARVIEW, INSTALLATION .
- Connect the negative battery cable.
- Perform the FFC calibration procedure. Refer to MODULE, FORWARD FACING CAMERA (FFCM), MODULE PROGRAMMING .