Module, HVAC: Installation
WARNING: This page is about a different car, the 2017 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Illustration shown with instrument panel removed from view for clarity.
- Position the Heating, Ventilation, and Air Conditioning (HVAC) module (1) to the air inlet housing (4) and engage the module to the two front retaining screws (2).
- Loosely install the screw (5) that secures the rear of the HVAC module to the air inlet housing.
- Tighten all the screws that secure the HVAC module to the air inlet housing.
- Connect the wire harness connector (3) to the HVAC module.
- Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, INSTALLATION .
- Connect the negative battery cable.
- Perform the HVAC Verification Test. Refer to HVAC VERIFICATION TEST .