Module, Keyless Ignition Node (Kin): Removal
WARNING: This page is about a different car, the 2017 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Mid ICS shown, base similar.
- Disconnect the negative battery cable.
- Remove the instrument cluster bezel (2). Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .
- Reach through the Integrated Center Stack (ICS) screen opening and disconnect the Keyless Ignition Node (KIN) electrical connector.
- Press on the tabs (2) and push the KIN (1) out the front of the instrument panel.