Module, Memory: Removal
WARNING: This page is about a different car, the 2017 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Depending on how equipped, more memory seat module electrical connectors may be present than shown in the illustration.
- Disconnect and isolate the battery negative cable.
- Remove the fasteners that secure the driver seat to the body and tip the seat rearward to gain access to the underneath of the seat. Refer to SEAT, FRONT, REMOVAL .
- Disconnect all the electrical connectors (1) from the front of the Memory Seat Module (MSM) (2).
- Disengage the two front MSM retaining tabs (3 and 5) from the bracket (4) by carefully pushing up on the front of the MSM.
- Disengage the two rear MSM retaining tabs from the bracket by carefully pulling the MSM forward.
- Disconnect all electrical connectors from the rear of the MSM and remove the MSM.