Sunroof Or Sunshade Obstacle Detection Override

WARNING: This page is about a different car, the 2017 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.

There are two methods for overriding the obstacle detection of the sunroof. If sunroof is experiencing auto-reversals but no obstacle is present in roof opening follow procedure. Refer to MOTOR, SUNROOF, STANDARD PROCEDURE .

OVERRIDE - METHOD 1 - Press and hold the sunroof CLOSE switch. Obstacle detection is not active during manual (press & hold switch) operation of the sunroof or power sunshade.

OVERRIDE - METHOD 2 - If the sunroof auto-reverses three consecutive times during express (one touch) close operation, the sunroof will enter override mode. All switch commands will be in manual mode (one-touch express operation will be disabled) while the obstacle detection feature is in override mode. Sunroof or power sunshade must be fully closed in manual mode (press & hold switch) or vehicle ignition cycled off and back on to exit override mode.