Diagnostic Test

CHECK FOR AN ACTIVE DTC 

1. Turn the ignition on.
2. With the scan tool, create a Vehicle Scan Report and attach it to the repair order.
3. With the scan tool, read the Door Module DTCs.

   Is the DTC active or stored?

   • Replace the Driver Door Module in accordance with Service Information. Refer to MODULE, DOOR (DDM/PDM), REMOVAL .
   • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
   • Review the Vehicle Scan Report and Repair any other DTCs that have set with the appropriate procedure in Service Information.
   • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .