LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2017 >> Durango SXT, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Keyless Ignition Node (Kin) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Keyless Ignition Node (Kin): Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
    GC0173785Courtesy of CHRYSLER GROUP, LLC
  3. Using a trim stick or another suitable wide flat-bladed tool, disengage the snap clips that secure the molded hard plastic outer edges of the steering column gap hider bezel (1) to the instrument panel.
    GC0173545Courtesy of CHRYSLER GROUP, LLC
  4. Position the telematic steering column outward and slide the gap hider forward.
    GC0173633Courtesy of CHRYSLER GROUP, LLC
  5. Reach in through the opening and disconnect the electrical connector (1) from the Keyless Ignition Node (KIN) module.
    GC0173625Courtesy of CHRYSLER GROUP, LLC
  6. There is a tab (1) on each side of the KIN. To remove the KIN, release each tab securing the KIN to the bezel.
scientia non olet · About LEMON Manuals