RF-Hub, Pcm And BCM Replacement And Programming Order Guide

Module	POWERNET MODULE REPLACEMENT GUIDE (RF-HUB, PCM and BCM)
Module	Condition 1	Condition 2	Condition 3	Condition 4	Condition 5	Condition 6	Condition 7	Condition 8
RF-HUB (and ELV/ESCL if equipped)	New	Existing	Existing	Existing	New	New	New	Existing
BCM	Existing	New	Existing	Existing	New	Existing	Existing	New
FOBIKs	Existing	Existing	New	Existing	Existing	New	Existing	New
PCM	Existing	Existing	Existing	New	Existing	Existing	New	Existing
PROGRAMMING ORDER	ASSOCIATED SCAN TOOL FUNCTION
1	Program Ignition FOBIKs (ignition off)	Cycle ignition on and wait 10 seconds	Program Ignition FOBIKs (ignition off)	Flash update PCM (if PCM arrives in a generic state)	Run Restore Vehicle Configuration (should enable PCM and RF-HUB)	Program Ignition FOBIKs (ignition off)	Program Ignition FOBIKs (ignition off)	Program Ignition FOBIKs (ignition off)
2	RF-HUB Replace	BCM Replace (in RFH)	----	Check PCM VIN and other PCM routines	Program Ignition FOBIKs (ignition off)	RF-HUB Replace	Flash PCM (if PCM arrives in a generic state)	Cycle ignition on and wait 10 seconds
3	----	----	----	----	Run Restore Vehicle Configuration again to write full configuration	----	Check PCM VIN and other PCM routines	BCM Replace (in RFH)
4	----	----	----	----	RF-HUB Replace	----	RF-HUB Replace	----
5	----	----	----	----	BCM Replace (in RFH)	----	----	----

Module	MODULE REPLACEMENT GUIDE (RF-HUB, BCM, PCM, FOBIK and ELV)
Module	Condition 9	Condition 10	Condition 11	Condition 12	Condition 13	Condition 14	Condition 15
RF-HUB (and ELV/ESCL if equipped)	Existing	Existing	Existing	New	New	New	New Part
BCM	New	Existing	New	Existing	New	New	New Part
FOBIKs	Existing	New	New	New	Existing	New	New Part
PCM	New	New	New	New	New	Existing	New Part
PROGRAMMING ORDER	ASSOCIATED SCAN TOOL FUNCTION
1	Flash update PCM (if PCM arrives in a generic state)	Program Ignition FOBIKs (ignition off)	Program Ignition FOBIKs (ignition off)	Program Ignition FOBIKs (ignition off)	Run Restore Vehicle Configuration (should enable PCM and RF-HUB)	Run Restore Vehicle Configuration (should enable PCM and RF-HUB)	Run Restore Vehicle Configuration (should enable PCM and RF-HUB)
2	Check PCM VIN and other PCM routines	Flash update PCM (if PCM arrives in a generic state)	Flash update PCM (if PCM arrives in a generic state)	Flash update PCM (if PCM arrives in a generic state)	Program Ignition FOBIKs (ignition off)	Program Ignition FOBIKs (ignition off)	Program Ignition FOBIKs (ignition off)
3	BCM Replace (in RFH)	Check PCM VIN and other PCM routines	Check PCM VIN and other PCM routines	Check PCM VIN and other PCM routines	Flash update PCM (if PCM arrives in a generic state)	Run Restore Vehicle Configuration again to write full configuration	Flash update PCM (if PCM arrives in a generic state)
4	----	----	BCM Replace (in RFH)	RF-HUB Replace	Check PCM VIN and the other needed PCM routines	RF-HUB Replace	Check PCM VIN and the other needed PCM routines
5	----	----	----	----	Run Restore Vehicle Configuration again to write full configuration	----	Run Restore Vehicle Configuration again to write full configuration
6	----	----	----	----	RF-HUB Replace	----	RF-HUB Replace
7	----	----	----	----	BCM Replace (in RFH)	----	BCM Replace (in RFH)