Installation - Bracket

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bracket, Anchor & Bushings

Courtesy of CHRYSLER GROUP, LLC

Check that the bracket is not damaged.
Place the new bracket (1a) bushings anchor (1b) supplied with the spare.
Turn with a key bushings (1b) in their seats about half a turn, until it reaches the stop (approximately 14 daN / m).
Position the bracket and fasten with rivets.
Install the front fascia. Refer to FASCIA, FRONT, REMOVAL AND INSTALLATION .
Connect the negative battery cable.