LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2017 >> Viper Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 ((Drivetrain Control Module (DTCM) - Electrical Diagnostics)) >> DTC Troubleshooting >> C2070-09-Hall Sensor 2 - Component Failures >> When Monitored And Set Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

When Monitored And Set Conditions

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
DRIVETRAIN CONTROL MODULE (DTCM) WIRE HARNESS
REAR PROPELLER SHAFT MOTOR
DRIVETRAIN CONTROL MODULE (DTCM)

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  .