LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2017 >> Viper Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 ((Drivetrain Control Module (DTCM) - Electrical Diagnostics)) >> DTC Troubleshooting >> U1964-83-Message Counter-CRC Fault On Engine4 Message - Value Of Signal Protection Calculation Incorrect
April 5, 2026: LEMON Manuals is launched! Read the announcement.

U1964-83-Message Counter-CRC Fault On Engine4 Message - Value Of Signal Protection Calculation Incorrect

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

Perform the COMMUNICATION PRE-DIAGNOSTIC PROCEDURE. Refer to STANDARD PROCEDURE .

NOTE:

Treat this DTC as a IMPLAUSIBLE SIGNAL  DTC when performing the COMMUNICATION PRE-DIAGNOSTIC PROCEDURE.

NOTE:

This DTC indicates that the PCM is not sending the required information over the CAN bus. Therefore, the PCM is considered to be the "offending module". The "offending module" will be referred to in the COMMUNICATION PRE-DIAGNOSTIC procedure.