LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2017 >> Viper Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Coolant Temperature: Installation

GC0135237Courtesy of CHRYSLER GROUP, LLC
1 - ENGINE COOLANT TEMPERATURE (ECT) SENSOR
2 - COOLING SYSTEM BLEED SCREW
3 - CAMSHAFT POSITION SENSOR
  1. Install the engine coolant temperature sensor. Tighten to 20 N.m (15 ft. lbs.).
  2. Connect the electrical connector to sensor.
  3. Fill the cooling system. Refer to FILLING COOLING SYSTEM  .
scientia non olet · About LEMON Manuals