LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2017 >> Viper GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Electronic Control Modules (Service Information)) >> Module, Compass >> Removal And Installation >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

WARNING: This page is about a different car, the 2016 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Compass Module, Electrical Connector, Rivets & Support Bracket
GC0173938Courtesy of CHRYSLER GROUP, LLC
  1. Position the compass module (3a) into the bracket (3b) and install the appropriate rivets (2).
  2. Connect the compass module electrical connector (1).
  3. Install the instrument panel glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals