LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Active Noise Cancellation (ANC) >> Installation >> Module Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module Installation

NOTE:

This procedure is for Alpine audio system. For all other audio systems,

Refer to AMPLIFIER, INSTALLATION .

  1. Install the retainers to the Active Noise Cancellation (ANC) module and attach to the ANC module bracket.
    GC0172171Courtesy of CHRYSLER GROUP, LLC
  2. Position the ANC module into place.
  3. Install and tighten the mounting fasteners (1) and (4).
  4. Connect the two wire harness connectors (3).
  5. Install the subwoofer. Refer to SPEAKER, INSTALLATION .
  6. Install the right quarter trim panel. Refer to PANEL, QUARTER TRIM, INSTALLATION .
  7. Connect the battery negative cable.
scientia non olet · About LEMON Manuals