Removal - Module
NOTE:
This procedure is for Alpine audio system. For all other audio systems,
Refer to AMPLIFIER, REMOVAL .
- Disconnect and isolate the battery negative cable.
- Remove the right quarter trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL .
- Remove the subwoofer. Refer to SPEAKER, REMOVAL .
- Disconnect the two wire harness connectors (3) from the Active Noise Cancellation (ANC).
- Remove the fasteners (1), (4) and remove the ANC module (2).
- Remove the retainers from the ANC module bracket (2).