LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> ProMaster 1500 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Powertrain Control (Pcm) >> Installation >> Diesel
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Powertrain Control (Pcm): Installation: Diesel

GC0162156Courtesy of CHRYSLER GROUP, LLC
  1. Install the Powertrain Control Module (PCM) (1) and tighten nuts (2) to 5 N.m (44 in. lbs.).
    GC0161910Courtesy of CHRYSLER GROUP, LLC
  2. Install the Powertrain Control Module (PCM) and bracket into vehicle and tighten nut to 5 N.m (44 in. lbs.).
  3. Connect the oil level module wire harness connector (1).
    GC0161970Courtesy of CHRYSLER GROUP, LLC
  4. Connect and lock the PCM wire harness connectors (1, 2).
    GC0162124Courtesy of CHRYSLER GROUP, LLC
  5. Install the PCM wire harness connector cover (1). Tighten nuts (2) to 5 N.m (44 in. lbs.).
    GC0162185Courtesy of CHRYSLER GROUP, LLC
  6. Attach the wire harness to bracket and connect wire harness connector (2).
  7. Connect the transmission wire harness connector (1).
    GC0161798Courtesy of CHRYSLER GROUP, LLC
  8. Install the Power Distribution Center (PDC) cover (2) and securely tighten nuts (1).
  9. Connect the negative battery cable.
    NOTE:

    If a new PCM is installed, it must be programed with the original Vehicle Identification Number (VIN) and mileage. If this is not done, a Diagnostic Trouble Code (DTC) may set.

    NOTE:

    If a new PCM is installed. Refer to MODULE, POWERTRAIN CONTROL (PCM), MODULE PROGRAMMING .

  10. If a new PCM is being installed, use a scan tool and program the new PCM with the original VIN and vehicle mileage.
scientia non olet · About LEMON Manuals