Module, Powertrain Control (Pcm): Removal: Diesel

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable.
2. Remove nuts (1) and the Power Distribution Center (PDC) cover (2).

   Courtesy of CHRYSLER GROUP, LLC

3. Disconnect the transmission wire harness connector (1).
4. Disconnect wire harness connector (2) and detach wire harness from bracket.

   Courtesy of CHRYSLER GROUP, LLC

5. Remove nuts (2) and the PCM wire harness connector cover (1).

   Courtesy of CHRYSLER GROUP, LLC

6. Unlock and disconnect the Powertrain Control Module (PCM) wire harness connectors (1, 2).

   Courtesy of CHRYSLER GROUP, LLC

7. Disconnect the oil level module wire harness connector (1).
8. Remove the nut (2) and the PCM with bracket from vehicle.

   Courtesy of CHRYSLER GROUP, LLC

9. Remove the nuts (2) and the PCM (1) from the bracket.