LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2019 >> Challenger SXT, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Memory >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Memory: Removal

GC0144638Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the fasteners that secure the driver seat to the body and tip the seat rearward to gain access to the underneath of the seat. Refer to SEAT, FRONT, REMOVAL .
  3. Disconnect all the electrical connectors (1) from the front of the Memory Seat Module (MSM) (2).
  4. Disengage the two front MSM retaining tabs (3 and 5) from the bracket (4) by carefully pushing up on the front of the MSM.
  5. Disengage the two rear MSM retaining tabs from the bracket by carefully pulling the MSM forward.
  6. Disconnect all electrical connectors from the rear of the MSM and remove the MSM.
scientia non olet · About LEMON Manuals