Diagnostic Test

CHECK FOR RELATED DTCS
1. With the scan tool, read Memory Seat Module-Driver (MSMD) DTCs.
  Does the scan tool display any seat position sensor or circuit performance DTCs?
  
  Yes
  - Perform the appropriate MSMD DTC diagnostic procedure. Refer to DIAGNOSTIC CODE INDEX .
  No
  - Go To 2
CHECK THE SEAT TRACK FOR DAMAGE OR OBSTRUCTIONS
1. Check the seat track for any obstructions or damage that my inhibit seat movement.
  Were any problems found?
  
  Yes
  - Repair as necessary.
  - Perform the POWER SEAT SYSTEM VERIFICATION TEST. Refer to POWER SEAT SYSTEM VERIFICATION TEST .
  No
  - Go To 3
CHECK FOR AN ACTIVE DTC
1. With the scan tool, read Memory Seat Module-Driver (MSMD) DTCs and record on the repair order.
2. With the scan tool, erase MSMD DTCs.
3. Turn the ignition off.
4. Turn the ignition on.
5. Move the seat in the full forward horizontal position.
6. With the scan tool, read MSMD DTCs.
  Is the DTC active?
  
  Yes
  - With the scan tool, perform the MSMD Standardization Routine.
  - Perform the POWER SEAT SYSTEM VERIFICATION TEST. Refer to POWER SEAT SYSTEM VERIFICATION TEST .
  No
  - The condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals, and correct pin tension and repair as necessary. If no problems are found, test complete.
  - Perform the POWER SEAT SYSTEM VERIFICATION TEST. Refer to POWER SEAT SYSTEM VERIFICATION TEST .