LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2019 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Forward Facing Camera (FFCM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Forward Facing Camera (FFCM): Installation

NOTE:

Ensure that the windshield is clean of dirt, dust, or finger prints prior to installing the Forward Facing Camera Module (FFCM).

  1. Install the FFCM to the bracket on the windshield. Position the FFCM to the bracket attachment point making sure that the alignment tabs are proper and set the FFCM in place until the bracket locks engage.
  2. Connect the wire harness connector to the back of the FFCM.
  3. Assemble the rear view mirror covers into place. Refer to MIRROR, REARVIEW, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
  5. Perform the FFCM calibration procedure. Refer to MODULE, FORWARD FACING CAMERA (FFCM), MODULE PROGRAMMING .
scientia non olet · About LEMON Manuals