LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2019 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Radio Frequency (RF Hub) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Radio Frequency (RF Hub): Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the left rear cargo quarter trim panel and position aside to access the RF hub. Refer to PANEL, QUARTER TRIM, REMOVAL .
    GC0184538Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the electrical connectors (1).
  4. If equipped, disconnect the remote start antenna connector
  5. Remove the fasteners (2) and remove the RF Hub from the vehicle.
scientia non olet · About LEMON Manuals