LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2019 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Body Control (BCM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Body Control (BCM): Installation

GC0158355Courtesy of CHRYSLER GROUP, LLC
  1. Install the BCM to the mounting bracket.
  2. Install all the fasteners (2) to secure the BCM to the bracket.
  3. Connect all harness connectors to the BCM assembly.
    GC0145626Courtesy of CHRYSLER GROUP, LLC
  4. Install the passenger side lower cowl panel (1).
  5. Install the passenger side lower dash closeout panel.
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  7. Using the scan tool, perform the Body Verification Test. Refer to BODY VERIFICATION TEST .
scientia non olet · About LEMON Manuals