LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2019 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Security Gateway (SGW) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Security Gateway (SGW): Installation

NOTE:

If a NEW  Security Gateway (SGW) module is being installed, use the diagnostic scan tool to flash the module. Failure to flash the module will leave the SGW module in a locked mode preventing SGW module operation.

  1. Position the SGW module to the bracket, then install and securely tighten the screws.
  2. Connect the SGW module wire harness connectors.
  3. Install the SGW module bracket bolts and securely tighten the bolts.
    GC0145521Courtesy of CHRYSLER GROUP, LLC
  4. Connect electrical connector, position passenger silencer panel (1) on instrument panel and install three tabs.
  5. Install passenger side cowl panel. Refer to PANEL, COWL TRIM, SIDE, INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  7. If a NEW  SGW module is installed, use the diagnostic scan tool to flash the SGW module.
scientia non olet · About LEMON Manuals