Module, Adaptive Cruise Control (Acc): Removal: Bracket

Remove the Adaptive Cruise Control (ACC) module from the mounting bracket. Refer to MODULE, ADAPTIVE CRUISE CONTROL (ACC), REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Remove the two fasteners (1) that secure the bracket (2) to the underside of the front bumper support bar.
Remove the mounting bracket from the bumper support bar.
NOTE:
The three molded plastic ball socket clips in the ACC module mounting bracket MUST be removed, discarded and replaced with new ball socket clips any time the module is removed from the bracket.
Remove the three molded plastic ball socket clips from the back side of the ACC module mounting bracket and discard. The clips are removed by rotating them counterclockwise.