Module, Park Assist (PAM): Installation
- Position the Park Assist Module (PAM) (4) to the right lower inner D-pillar (2).
- Engage the two mounting tabs on the bottom of the PAM into the two slots in the inner D-pillar.
- Reinstall the plastic push-in fastener (1) that secures the mounting tab at the top of the PAM to the inner D-pillar.
- Reconnect the body wire harness connectors (3) to the PAM connector receptacles. Vehicles with the front park assist option will have an additional connection to the PAM at this location, which must also be reconnected.
- Reinstall the trim onto the right quarter inner panel. Refer to PANEL, QUARTER TRIM, INSTALLATION .
- Reconnect the negative cable to the battery.