LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2019 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Power Sunroof (PSM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Power Sunroof (PSM): Installation

WARNING:

Do not attempt to move or reposition the sunroof glass panel or drive cables with the sunroof motor and module unit removed. Damage to the vehicle, to the sunroof or personal injuries may result.

WARNING:

The Sunroof Motor And Module Initialization procedure must be completed any time a sunroof motor and module unit is replaced with a new component. Failure to perform this procedure may result in damage to the vehicle, to the sunroof or in serious or fatal injuries.

GC0170663Courtesy of CHRYSLER GROUP, LLC
  1. Position the sunroof motor close enough to connect the wire harness connector (2).
  2. Position the motor onto the sunroof frame.
  3. Install and tighten the three screws (1) to 3 N.m that secure the motor to the sunroof frame.
  4. Install the front of the headliner. Refer to HEADLINER, INSTALLATION .
  5. Connect the battery negative cable.
  6. Perform the Sunroof Motor Initialization procedure. Refer to SUNROOF INITIALIZATION AND OBSTACLE DETECTION CALIBRATION .
scientia non olet · About LEMON Manuals