LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2019 >> ProMaster City Base >> Repair and Diagnosis >> Engine Performance >> System >> 2.4L - Intermittent Condition, Pcm/TCM Programming, Pre-Diagnostic Troubleshooting Procedure & Powertrain Verification Test >> Standard Procedure >> Pcm / TCM Programming >> CM2100 PCM/ECM (6.7l)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CM2100 PCM/ECM (6.7l)

If a CM2100 PCM/ECM (6.7l) was replaced, perform the following additional steps and/or routines: 

  1. PCM/ECM Replaced - if WIN equipped
  2. Check PCM/ECM VIN - if NOT WIN equipped
  3. Enable / Disable Vehicle Features - need to enable features
  4. Injector Quantity Adjustment
  5. Reset Regenerative Filter Timers
  6. Mobile DeSoot - NO Minimum Required Soot Load

If an Aisin TCM was replaced, perform the following additional steps and/or routines: 

If an EATX TCM was replaced, perform the following additional steps and/or routines: 

If an NGC3 TCM ONLY was replaced, perform the following additional steps and/or routines: 

If an NGC4 TCM ONLY was replaced, perform the following additional steps and/or routines: 

  1. Quicklearn