Sensor, Coolant Temperature: Installation: 6.2L
WARNING: This page is about a different car, the 2020 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
- Apply MOPAR® thread sealant with PFTE to the Engine Coolant Temperature (ECT) sensor threads.
- Install the ECT sensor (1) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Connect the ECT sensor wire harness connector (2).
- Install air cleaner body. Refer to INSTALLATION .
- Fill the cooling system. Refer to STANDARD PROCEDURE .
- Connect the negative battery cable.