Module, Active Damping Control (ADCM): Installation
WARNING: This page is about a different car, the 2021 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Slide the Active Damping Control Module (ADCM) (1) into position making sure the latches secure the ADCM.
- Install the Active Damping Control Module retaining bolts (2). Tighten the bolts to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
- Connect the wire harness connectors to the ADCM.
- Position the carpet back in the original location and install the fasteners.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
- Perform the ADCM Verification Test.