Module, Drivetrain Control (DTCM): Installation
WARNING: This page is about a different car, the 2021 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Position the Drivetrain Control Module (DTCM) (3) onto the mounting studs (5) and (6).
- Install the DTCM mounting fasteners (2) and (4) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
- Secure the driver footwell carpet back to its installed position.
- Install the cowl side trim panel (1). Refer to PANEL, COWL TRIM, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.