Module, Integrated Center Stack (ICSM): Installation
WARNING: This page is about a different car, the 2021 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Position the Integrated Center Stack (ICS) to the bezel panel and install the fasteners (1).
- Connect the wiring harness connector (1) to the back of the ICS and snap the ICS back into the installed position.
- Align the storage bin (1) and push in to engage the two retaining clips.
- Install the fasteners (2) and tighten securely.
- Install the transmission shifter. Refer to SHIFTER, TRANSMISSION, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.