LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2021 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Electronic Control Modules (Service Information)) >> Module, Intrusion Transceiver (ITM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Intrusion Transceiver (ITM): Removal

WARNING: This page is about a different car, the 2021 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0146811Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the overhead console (1) from the headliner. Refer to CONSOLE, OVERHEAD, REMOVAL .
    GC0146812Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the intrusion module sensor pigtail wire harness connector (1) from the Intrusion Transceiver Module (ITM) (2).
  4. Release the latch features that secure the ITM to the overhead console housing.
  5. Remove the ITM from the overhead console housing.
scientia non olet · About LEMON Manuals