LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2021 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Electronic Control Modules (Service Information)) >> Module, Radio Receiver >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Radio Receiver: Removal

WARNING: This page is about a different car, the 2021 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
  2. Remove the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
    GC0170918Courtesy of CHRYSLER GROUP, LLC
  3. Remove the fasteners (2) that secure the radio (1) to the instrument panel support structure.
  4. Pull the radio out from the instrument panel far enough to access the connections at the back of the radio.
    GC0162395Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the antenna connectors (3) and the instrument panel wire harness connector (2) from the back of the radio.
  6. If equipped, disconnect the Universal Serial Bus (USB) connector (1) from the back of the radio.
  7. Remove the radio from the instrument panel.
scientia non olet · About LEMON Manuals