Immobilizer Components And Replacement Guide
WARNING: This page is about a different car, the 2021 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| Priority | Procedure Name | BCM | PCM | ESL | FOBIKs | RFH | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Vehicle Reconfiguration | X | ||||||||
| 2 | RF-Hub Replace | X | ||||||||
| 3 | Program Ignition FOBIKs | X | ||||||||
| 4 | BCM Immobilizer Replace | X | ||||||||
| 5 | Immobilizer ECUs Replaced | X | X | |||||||
| 6 | ECU Specific Procedures | X | X | X | X | |||||
| *****19MY + LD Pursuit Vehicles Are NOT Applicable to this document | ||||||||||
EXAMPLE - If a user has replaced both the PCM and BCM, the routines should be ran in the following order:
| 1. Vehicle Reconfiguration |
| 2. BCM Immobilizer Replace |
| 3. Immobilizer ECUs Replaced |
| 4. ECU Specific Procedures |