LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2021 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Door (DDM/PDM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Door (DDM/PDM): Installation

GC0145735Courtesy of CHRYSLER GROUP, LLC
  1. Position the door control module (2) to the front door hardware module carrier (1).
  2. Install and tighten the fasteners (3) that secure the door control module to the front door hardware module carrier. Tighten the screws securely.
  3. Connect the wire harness connectors to the door control module.
  4. Install the lower trim panel to the inside of the front door. Refer to PANEL, DOOR TRIM, INSTALLATION .
  5. Connect the battery negative cable.
  6. The Manual Relearn procedure needs to be performed following service of a door control module so that the module can learn the correct hard stops of the power window regulator. Refer to DOOR MODULE LEARN PROCEDURES .
scientia non olet · About LEMON Manuals